Written by Mike J McGuireMay 22, 2020September 28, 2020

DETA Grid Connect 3 and 4 Gang Light Switches and Home Assistant

I’ve been using the Deta Grid Connect 1 and 2 gang light switches with Home Assistant for about 6 months now – as mentioned in this post. The 3 and 4 gang switches have finally arrived, and having picked one up from Bunnings, I was keen to get it setup and the firmware replaced with […]

Written by Mike J McGuireDecember 9, 2019July 3, 2020

DETA Grid Connect Smart Switch and Home Assistant

I recently bought a DETA Grid Connect Smart Switch from Bunnings, with the plan being to integrate them with Home Assistant, using ESPHome, or other user-provided code. I actually didn’t use ESPHome, but rather pushed my own code/image to the device. The device uses an ESP8266 compatible chip, with a product code of TYWE3S. I’ve […]

Hopefully Helpful Hints // Mike J McGuire

No one was arguing whether the glass was half empty or whether the glass was half full, only that the glass was either too big for the requirement, or that the materials estimate for the wine was incomplete.

Tag: deta

DETA Grid Connect 3 and 4 Gang Light Switches and Home Assistant

DETA Grid Connect Smart Switch and Home Assistant